|
The touchscreen comprises;
a safety laminated front glass and rear plastic sensor, which encompasses the sensing medium;
a flying connector tail; and
a separate control card that connects to the communications port of the computer.
Detection Method:
PCT™
Power Requirements: <100mA,
USB Controller powered from VBUS 5V dc, Serial Controller powered by
6V to 12V dc external power supply CE, FCC Class B
Operating Temperature: -20°C to >+60°C
Humidity: 0 to 90% RH @ 40°C, unaffected by condensation
Speed of Response: <10ms
Durability: Long term; glass front,
no surface coatings, without moving or wearing parts
Resolution: <~ 1mm on a 10.4” to 17.1” sized unit
What it Detects: Finger, gloved or ungloved
Resistance to Contamination: Unaffected by harsh cleaning fluids, solvents, grease and dirt. Exceeds requirements of ASTM-F1598-95
Light Transmission: ~90%
Immunity to Damage: Inert glass front – sensing media is not touched by the operator. No moving parts
Stability: Use of fixed wires ensures one time calibration and no drift with usage or time
Glass Options:
Anti-glare (clear, tinted, chemical or thermal toughened - ZYBRID™)
MTBF (Sensor):
Glass with no moving parts or coatings
Regulatory: CE, FCC-B and UL when installed in system
Sealability: Ability to be NEMA 4, 12 and IP65 compliant
OS Support: Windows 98SE,
ME, NT, 2000, XP, XP-E, CE and Linux.
Protocol:
Protocol available to allow users to customise their driver design
Connectivity: Serial RS-232 or USB v1.1, compatible with USB v2.0
|
